Kubota — BEACON LIGHT

INSTALLING THE IMPLEMENT CONTROL BOX CAB OPERATION 4. Set the blower switch and the temperature control dial to the [3] and max (end of clockwise) positions, respectively. NOTE : Before removing the corner plug, cut the two spots of the weather strip above the corner plug with a knife. Do not remove the weather strip of the corner plug to prevent rainwater intrusion into the CAB. (1) Mode switch (2) Temperature control dial (A) (1) Corner plug (2) Weather strip (rubber) (3) Knife ELECTRICAL OUTLET The tractor is equipped with electrical outlets which serve the following functions. INSTALLING THE IMPLEMENT CONTROL BOX 1. Make an opening in each of the corner plugs.

Introduce the implement control cable and hydraulic hose through these openings into the CAB. (1) Accessory electrical outlet (Max 10 A) (2) Accessory electrical outlet (A) Terminal: Through the ACC position of the key switch (Max 5 A) (B) Terminal: Through the battery direct (Max 25 A) (C) Terminal: Ground BEACON LIGHT The beacon light switch with wire harness for beacon light connection is equipped. Turn on the key switch and press the bottom half of the beacon light switch. Then the beacon light and indicator of switch will be activated. (1) Corner plug M5091N, M5101N 97