CAB OPERATION AIR CONDITIONER 5. Adjust the temperature control dial to or intermediate position to achieve a comfortable temperature level. NOTE : In summer when the heater is not used, keep the temperature control dial at the max (end of counterclockwise) position. Otherwise, hot air will raise the temperature in the CAB. (1) Temperature control dial (A) Center position area (1) Mode switch (2) Temperature control dial (3) Blower switch (4) Air conditioner switch with in- dicator light (A) (B) 4.4 Defrosting or demisting To defrost or demist the windshield, take the following steps. 1. Set the mode switch to the position. 2. Open the front air outlet and direct it to the windshield. 3.
Set the recirculation or fresh air selection lever to the “FRESH AIR” position. 4.3 Foot warming and head cooling position. 2. In the cooling or dehumidifying-heating mode, set the temperature control dial at the center position area. 3. Open the front air outlet and the door air outlet direct it to your feet. 4. You can feel your head cool and your feet warm. 1. Set the mode switch to the 96 M5091N, M5101N