Kubota — 4.2 Cooling or dehumidifying-heating

AIR CONDITIONER CAB OPERATION 3.2 Temperature control dial Set this dial at the desired position to obtain the optimum air temperature. Turn the dial in the direction to obtain warmer air. Turn it in the direction to obtain cooler air. 3.3 Blower switch Air volume can be changed in 3 steps. At the [3] position, the largest air volume is obtained. 3.4 Air conditioner switch (1) Mode switch (2) Blower switch (3) Temperature control dial Push this switch to activate the air conditioner. An indicator light will light up when the switch is set to . Push the switch again to turn the air conditioner off, in which case the indicator light will turn off. IMPORTANT :

To operate the air conditioner after the tractor has not been used for one week or longer, run the engine at idling speed first and then set the air conditioner switch to . Keep this for one minute or so. If the air conditioner switch is set to with the engine running at high rpm, the compressor may get in trouble. NOTE : With the blower switch at the position, the indicator light will not light up even when the air conditioner switch is set to . 4.2 Cooling or dehumidifying-heating position. 2. Set the recirculation or fresh air selection lever to the “FRESH AIR” position. To lower the temperature in the CAB quickly, set this switch to the “RECIRCULATION” position. 3.

Press and turn on the air conditioner switch with indicator. 4. Turn on the blower ( [1] / [2] / [3] ) switch. 1. Set the mode switch to the 4. Operation 4.1 Heating 1. Set the mode switch to the position. 2. Set the recirculation or fresh air selection lever to the “FRESH AIR” position. To raise the temperature in the CAB quickly, set this lever to the “RECIRCULATION” position. 3. Adjust the blower ( [1] / [2] / [3] ) switch and the temperature control dial to achieve a comfortable temperature level. , or M5091N, M5101N 95