Kubota — 3.1 Mode switch

CAB OPERATION AIR CONDITIONER (1) Front air outlet (A) “WINDSHIELD” (B) “CLOSED” (C) “CHEST AREA” (1) Recirculation or fresh air se- lection lever “FRESH AIR” “RECIRCULATION” NOTE : When heating, do not keep the switch at the “RECIRCULATION” position for a long time. The windshield easily gets foggy. While working in dusty conditions, keep the lever at the “FRESH AIR” position. This increases the pressure in the CAB, which helps prevent dust from coming into the CAB. 2.2 Side air outlet and door air outlet The side and door air outlets can be adjusted to direct air on to the operator, door window or the rear of the CAB. 3. Control panel (1) Side air outlet (2) Door air outlet (A) (B) NOTE :

If the airflow rate at the face is too low, close the door air outlet. (1) Mode switch (2) Temperature control dial (3) Blower switch (4) Air conditioner switch with in- dicator light (A) (B) 2.3 Recirculation or fresh air selection lever FRESH AIR: Set the lever to the 3.1 Mode switch position, and fresh air will flow into the CAB. This is helpful when you work in dusty conditions or if the glass windows get foggy. Set the mode switch to the desired position. Air is blown from the front and side air outlets. Air is blown from only the front air outlets. With this switch at the middle position, air is blown weaker from the side air outlets (head) and stronger from the front air outlets.

RECIRCULATION: Set the lever to the position, and the in-CAB air will be recirculated. This is useful for cooling or heating the CAB quickly or keeping it extra cool or warm. 94 M5091N, M5101N