Kubota — 5. Turn signal switch and hazard light switch

OPERATING THE TRACTOR STARTING THE TRACTOR NOTE : The hazard light switch is operative when the key switch is in the , or position. The turn signal light switch is only operative when the key switch is in the position. Be sure to return the turn signal switch to its center position after turning. (1) Steering wheel tilt pedal (A) “PRESS DOWN” 4. Light switch Turn the light switch clockwise, and the following lights are activated on the switch position. (1) Hazard light switch (2) Turn signal light switch (3) Hazard and turn signal indi- cator (A) “RIGHT TURN” (B) “LEFT TURN” (1) Head light switch Head lights OFF. Position lights ON. Head lights dimmed, low beam. Tail lights ON.

Head lights ON, high beam. Tail light ON. 5. Turn signal switch and hazard light switch (1) Turn signal and hazard light Hazard light 1. When the hazard light switch is pushed, the hazard lights flash, along with the LH and RH indicators on the instrument panel. 2. Push the hazard light switch again to turn off the hazard lights. Turn signal light To indicate a right turn, turn the turn signal light switch clockwise. To indicate a left turn, turn the turn signal light switch counter-clockwise. The corresponding right and left turn signal lights and indicator on the instrument panel will flash. (1) Turn signal and hazard light 46 M5091N, M5101N