OPERATING THE TRACTOR STARTING THE TRACTOR If it is necessary to run the engine, make sure: Both front and rear wheels are off the ground and secured with stands before starting engine. When you step on the brake pedal while driving in 2WD mode, the “4WD braking system” gets activated. NOTE : The 4WD braking system is active even when the hydraulic system is damaged or the engine is stopped. 8. Parking brake lever (1) Gear-locked parking brake lever (2) Release button (A) “Push to transport position” To release the parking brake, depress the brake pedals, push the release button and push the parking brake lever down to transport position. NOTE :
In moving the gear-locked parking brake lever, you may feel it heavy sometimes, or light at other times. This is normal. The parking brake warning indicator on the Easy Checker will turn off when both parking brakes are released. If the shuttle shift lever is moved when the gear- locked parking brake is applied, a warning buzzer will sound. Be sure to apply both parking brakes after stopping the tractor. 10. Clutch pedal (1) Parking brake lever (2) Release button (A) “Push down to transport po- sition” IMPORTANT : If the tractor is operated with the parking brake set, the parking brake will be damaged.
If the tractor is traveling when the parking brake lever is applied, a warning buzzer will sound. If the buzzer sounds, immediately release the parking brake lever. WARNING To avoid personal injury or death: The sudden release of the clutch may cause the tractor to lunge in an unexpected manner. Always use the clutch pedal to start the tractor. The clutch is disengaged when the clutch pedal is fully pressed down. 9. Gear-locked parking brake lever To release the gear-locked parking brake, depress the brake pedals, push the release button and push the gear-locked parking brake lever to transport position. (1) Clutch pedal 48 M5091N, M5101N