Kubota — 19. Hand throttle lever

STARTING THE TRACTOR OPERATING THE TRACTOR 18. 4WD and Bi-speed turn switch WARNING To avoid personal injury or death: Do not engage the front-wheel drive when traveling at road speed. When driving on icy, wet, or loose surfaces, make sure the tractor is correctly ballasted to avoid skidding and loss of steering control. Operate at reduced speed and engage front- wheel drive. 4WD model tractor is equipped with 4-wheel braking and appropriate care should be taken during hard braking. Do not brake suddenly. An accident may occur as a result of a heavy towed load shifting forward or loss of control. The braking characteristics are different between 2 and 4-wheel drive tractor models.

Be aware of the difference and use carefully. Do not use Bi-speed turn at high speed. Bi-speed turn enables short and fast turns, therefore, become familiar with its performance before operating in close or confined areas. (1) 4WD indicator (2) Bi-speed turn indicator NOTE : This switch can be operated when the tractor is on the go or at rest without depressing the clutch. Bi-speed turn system works when you press the 4WD and Bi-speed turn switch and the front tire (inside of the turn) exceeds 35 degrees. Bi-speed turn makes the front tire speed 1.6 times faster than the standard 4WD front tire speed.

Bi-speed turn operates only when the tractor travel speed is 10 km/h (6.2 mph) or less at the start of the turn. Press the right half of this switch; The front-wheel drive (4WD) is engaged. The 4WD indicator comes on when the system is in 4WD mode. Press the left half; The Bi-speed turn system activates. The 4WD indicator and Bi-speed turn indicator come on when the system is in Bi-speed turn mode. It returns to a central position; The drive system returns to 2WD mode The all indicators goes off when the system is in 2WD mode. 18.1 Front-wheel drive and Bi-speed turn usage Front-wheel drive is effective for the following jobs:

When greater pulling force is needed, such as working in a wet field, when pulling a trailer, disking or harrowing. When working in sandy soil. When working on a hard soil where a rotary tiller might push the tractor forward. For increased braking at reduced speed. Bi-speed turn use is effective for the following jobs: Turning at the end of rows. (planting, cultivating, harrowing.) Increasing maneuverability when working in tight spaces. IMPORTANT : Tires will wear quickly if the front-wheel drive is engaged on paved roads. (1) 4WD switch and Bi-speed turn switch (A) 4WD “ON” (B) Bi-speed turn “ON” 19.

Hand throttle lever Pulling the throttle lever back decreases engine speed, and pushing it forward increases engine speed. M5091N, M5101N 53