Kubota — 17. Clutch-off switch

OPERATING THE TRACTOR STARTING THE TRACTOR If the buzzer sounds, return the shuttle shift lever to neutral position. If the gear-locked parking brake lever is released while the buzzer is sounding, the tractor will lunge unexpectedly. Raise up and shift the shuttle shift lever forward to obtain forward speeds and shift back to obtain reverse speeds. This shifting does not require clutch operation. IMPORTANT : The shuttle shift lever may be shifted while the tractor is moving slowly. NOTE : While the shuttle shift lever is at the “NEUTRAL” position, the [N] character appears on the LCD monitor. (1) Dual speed shift switch (2) Dual speed indicator (A) (B) 17.

Clutch-off switch WARNING To avoid personal injury or death: If you release the clutch-off switch when the travel speed is selected, the clutch becomes engaged and the tractor will begin to move. Always use the clutch pedal to start the tractor. The clutch-off switch allows shifting gears without using the clutch pedal. While pressing the clutch-off switch, the clutch is disengaged. When the clutch-off switch is released, the clutch is engaged. Similarly to how the shuttle shift lever is shifted from [N] to [F] (or [R] ), the clutch is engaged through a smooth wave-like motion. (1) “NEUTRAL” 16.

Dual speed shift switch The dual speed shift switch can be operated when the tractor is traveling without using the clutch. This switch affects tractor travel speed change by about 19%. speed and speed switch back and forth each time this switch is pushed. NOTE : While pressing the clutch-off switch, the position display of the shuttle shift lever on the LCD monitor flashes. Dual speed indicator The indicator comes on when the dual speed switch is set to . The indicator goes off when the dual speed switch is set to . (1) Clutch-off switch (A) “FLASH” 52 M5091N, M5101N