LCD MONITOR OPERATING THE TRACTOR Turn the key switch to position to finish setting. (1) Key switch (2) Mode selector switch (3) Select switch (4) LCD monitor (1) Clock setting (2) Clock ON/OFF setting (3) Tire circumference setting (4) Unit setting (5) PTO speed display setting NOTE : Errors may occur in the fuel consumption display depending on the conditions of use. Use the displayed data only as an approximate guide. In particular, do not use the total fuel consumption display mode in place of the fuel gauge. The travel speed displayed when the wheels slip under traction is different from the actual one.
In cold weather, the LCD monitor response will normally be slower and the visibility be less than in warmer weather. 1. Various setting mode While pressing the mode selector switch, turn the key switch to position. The various setting mode screen appears on the LCD monitor. The various setting mode can set 5 items. M5091N, M5101N 57 No. Description Reference page (1) Forward operation is selected with the shuttle lever. --- Reverse operation is selected with the shuttle lever. --- The shuttle lever is at neutral position. --- The gear-locked parking brake lever is at parking position. --- Travel when the gear-locked parking brake lever is engaged. --- Blinking Clutch-off switch is pushed.
Clutch is disengaged. --- No display Shuttle lever system trouble. --- (2) Low temperature regulation in- dicator 42 Engine over-speed limiting indi- cator 54 (3) Trouble display A trouble-spot-pinpointing error code and the related control unit are displayed. 138 (4) Clock 57 (5) Travel speed 57 (6) PTO speed 57 (7) Performance monitor Various information can be selected by the operator. 61