Kubota — 1.3 Setting the tire circumference

OPERATING THE TRACTOR LCD MONITOR 1.1 Clock setting Then press the select switch, and the clock ON/OFF setting screen appears. 1. Press the mode selector switch to choose “Clock setting” . Then press the select switch, and the clock setting screen appears. (1) Clock ON/OFF setting (1) Clock setting (1) Clock ON/OFF setting screen 2. Press the select switch and select or . 3. Press the mode selector switch. 4. To complete the setting, select with the select switch. The various setting mode screen appears again. (1) Hour (2) Minute (3) Set switch 2. Setting the of the clock: a. Press the mode selector switch to choose the (highlighted). b. To put the clock forward, press the select switch. 3.

Setting the “Minute” of the clock: a. Press the mode selector switch to choose the “Minute” (highlighted). b. Carry out the “Minute” setting in the same way as the setting. 4. Press the mode selector switch. 5. To complete the setting, select with the select switch. The various setting mode screen appears again. 1.3 Setting the tire circumference When optional different-diameter tires are fitted on the machine, the travel speed display mode must be changed. Otherwise, the travel speed will not be correctly displayed. Such mode switching is also needed when the original tires are back on the machine. 1.2 Setting the clock display ON/OFF 1.

Press the mode selector switch to choose “Clock ON/OFF setting” . 58 M5091N, M5101N