LCD MONITOR OPERATING THE TRACTOR 2. Performance monitor Display change Use the mode selector switch and select switch to choose one of the items shown in the following table to be displayed on screen. Priority display 1. When the RPM dual memory setting is , the engine rpm A or B is displayed on the screen. When selecting any other information such as “Hour meter” or “PM buildup” , the item will be displayed for approximately 5 seconds before resuming the engine rpm A or B display. 2. Turn the RPM dual memory setting to display any other information continuously.
(See RPM dual memory setting on page 62.) (1) Performance monitor (2) Mode selector switch (3) Select switch List of types of information displayed on the performance monitor NOTE : Hold down the mode selector switch for 2 seconds or longer to reset the “Trip meter” , “Average fuel consumption” and “Total fuel consumption” displays to . M5091N, M5101N 61 Selected screen (mode) Display Remarks Reference page 1/4 Elapsed time (hour meter) • The hour meter indicates in 6 digits the hours for which the tractor has been used; the last digit indicates 1/10 of an hour. --- Trip meter • The total operating hours, counted from the previous re- setting, is displayed.
--- 2/4 Instantaneous fuel con- sumption • The “Instantaneous fuel consumption” is measured per hour. --- Average fuel consumption • The “Average fuel consumption” is measured per hour from the previous resetting. --- Total fuel consumption • The total fuel consumption, measured from the previous resetting, is displayed. --- 3/4 PM buildup (percentage) • The PM buildup inside the DPF muffler is displayed. • Regeneration is needed when the 100% level has been reached. • The more the bar is extended to the right, the more PM has built up. --- PM buildup (graph) 4/4 Memory A rpm • Engine RPM dual memory A rpm is displayed. 62 Memory B rpm • Engine RPM dual memory B rpm is displayed. 62