PTO PTO OPERATION PTO PTO OPERATION To turn 1. While pushing the switch, turn clockwise to the position and release your hand (in the position, switch slightly rises itself). WARNING To avoid personal injury or death: Disengage the PTO, stop the engine, and allow all rotating components to come to a complete stop before connecting, disconnecting, adjusting, or cleaning any PTO driven equipment. 1. PTO clutch control switch The PTO clutch control switch engages or disengages the PTO clutch which gives the PTO independent control. To turn 1. Push the switch, and the switch will return to the position. (1) PTO clutch control switch Turn the switch to to engage the PTO clutch.
Turn the switch to to disengage the PTO clutch. IMPORTANT : To avoid shock loads to the PTO, reduce engine speed when engaging the PTO, then open the throttle to the recommended speed. (A) 2. PTO clutch indicator NOTE : Tractor engine will not start if PTO clutch control switch is in the engaged position. If the PTO system is engaged and you stand up from the seat, the warning buzzer will whistle for about 10 seconds after standing up. This is because the tractor is equipped with “Operator Presence Control System” . (See Checking operator presence control (OPC) system on page 111.) The PTO clutch indicator turns on while PTO clutch control switch is in (engage) position. 68 M5091N, M5101N