REMOTE HYDRAULIC CONTROL SYSTEM HYDRAULIC UNIT 5. Hydraulic control unit use-reference chart In order to handle the hydraulics properly, the operator must be familiar with the following. Although this information may not be applicable to all types of implements and soil conditions, it is useful for general conditions. M5091N, M5101N 83 Implement Soil condition Top link mounting holes (1) Position control lever (2) Draft control lever Gauge wheel Moldboard plow Light soil Medium soil Heavy soil 3 2 or 3 2 Draft and mixed control (place the draft control lever to the suitable position and set the imple- ment pull with the position control lev- er).
Yes/No Disc plow --- 2 or 3 Harrow (spike, spring- tooth, disc type) --- 2 Subsoiler, etc. Weeder, ridger, etc. --- 1 Position control (hold the draft control lever at the frontmost position during operation). Yes Earth mover, digger, scraper, manure fork, rear carrier, etc. Yes/No Mower (mid-and rear- mount type) Hay rake, tedder, etc. No