Kubota — 4. Controlling and adjusting the flow rate

HYDRAULIC UNIT REMOTE HYDRAULIC CONTROL SYSTEM the way clockwise (C), and then turn it gradually counterclockwise until a required flow rate is reached. NOTE : Oil from the pump flows by priority to the auxiliary control valve. Surplus oil is fed to the 3-point hitch. With the auxiliary control valve at neutral, the total flow from the pump is fed to the 3-point hitch. IMPORTANT : When there is no need to adjust the flow rate, turn the flow control knob all the way counterclockwise and keep it in this position.

(1) Remote control valve (1) with flow control (2) Remote control valve (2) with flow control (3) Flow control knob for valve (1) (4) Flow control knob for valve (2) (A) “INCREASE” (B) “DECREASE” (C) 82 M5091N, M5101N