Prepare - 20 SK800 Operator’s Manual Prepare Jobsite Prepare Jobsite p Underground utilities. Contact can cause death or serious injury. Locate and verify underground utilities before digging or drilling. To help avoid injury: Expose lines by careful hand digging or soft excavation before operating equipment. Use appropriate equipment and procedures for exposing utility lines. Classify jobsite and follow precautions based on classification. Follow local regulations for digging near utilities. A successful job begins before working. The first step in planning is reviewing information already available about the job and jobsite. Review Job Plan Review blueprints or other plans.
Check for information about existing or planned structures, elevations, or proposed work that may be taking place at the same time. Select Start and End Points Select one end to use as a starting point. Consider the following when selecting a starting point: Slope Equipment should be parked on a level site. Consider how slope will affect setup and operation. Assess the risks on each slope to determine if factors affecting risks create an unsafe condition for working. See “Slope Guidelines” on page 52. Space Check that starting and ending points allow enough space for working. Comfort Consider shade, wind, fumes, and other site features.