Kubota — Belt, Fan

Maintenance - 68 SK800 Operator’s Manual Procedures Belt, Fan p Check every 150 hours. Adjust tension as needed. Change as needed. Check Check for excessive slack, damage, or wear. Belt is properly tensioned when it moves about 1/4-3/8” (7-9mm) when pushed at long span (shown). Adjust Tension 1. Loosen two alternator bolt (1, 2). 2. Adjust position as needed. 3. Tighten bolts. 4. Check tension. Change 1. Loosen two alternator bolts (1,2). 2. Replace fan belt. 3. Adjust position as needed. 4. Tighten bolts. 5. Check tension. 1 2