SK800 Operator’s Manual Maintenance - 69 Procedures p Coolant NOTICE: See “Approved Coolant” on page 61. Check before startup and every 10 hours. Change every 1000 hours. Check Level 1. Check at overflow bottle (2). 2. Add DEAC at fill (1) as needed to keep level at halfway point on overflow bottle. Change t46om006w.eps 1. Remove plug (3) to drain. 1 2. Install plug. 3. Add DEAC at fill to keep level at halfway point on overflow bottle. 2 Dust Ejector Valve t35om031w.eps Check dust ejector valve (shown) before startup and every 10 hours. Ensure valve is not inverted, damaged, plugged, or cracked. t43om004h.eps t43om004h.eps