Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE WARNING and hoses. If any problem is there is no leakage of fuel or damage to the hoses and tubes. If any problem is found, carry out 3 - 83 WALK-AROUND CHECK Before starti ng the engine, look around an d under the machine to check fo r loose nuts and bolt s, or leakage o f oil, fuel, or coola nt, and check condition of the work equipment and hydraulic system. Also check f or loose wiring and play , and ac cumulation of dust at places w ith high temperatures. Remove any fl ammable materials from around t he battery, engine, muffler, turbocharger, or other high temp erature engine parts.

Leakage of fue l or oil will cause the machine to c atch fire. Check carefully, be sure to repair an y problem, or c ontact your Komatsu distributor. Perform the following inspections and clea ning every day before starting engine f or the day's w 1. Check fo r damage, wear, play in work equipment, cylinders, linkage, hoses Check fo r cracks, excessive wear, play in work equipment, cylinders, linkag pair it. found, re pair it 2. Remove dirt and debris from around t he engine, battery, and radiator.

Check fo r dirt accumulated around the engine and radiator.Also check f or flammable materia l (dry leaves, t wigs, etc.) aro und the battery, engine muffl er, turbocharger, or other high temperature engine parts. If any dirt or e them. flammab le materials are found, remov 3. Check fo r coolant and oil leakage aro und the engine i Check fo r oil leakage from the engine a nd coolant leaks from the coolin g syste m. If any prob lem is found, r epair t. 4. Check fo Check th repairs. 5. Check fo r oil leakage of oil from trans mission case, final drive case, tandem drive case, hydraulic tank, circle ny problem is found, repair the place where the oil is leaking.

andem drive case, hy draulic tank, c ircle reverse gear case, hose, joints. Check th at there is no oil leakage. If a ny problem is found, repair the place w here the oil is 6. Check fo r leakage of oil from brake lin e Check th at there is no leakage of oil. I f any problem is found, repair th e place where the oil 7. Check fo r damaged or worn tires, whe els, and wheel hub bolts and n uts, che ck for loose w heel hub bolts and nuts. Check fo r cracks or peeling of the tires and for cracks or wear to the wheels (side rim, rim base, lock ring). any loose wheel hub bolts or nuts. If any abnormality is found, repair or replace the part. lve caps are missing, install new caps.

Tighten any loose wheel hub bolts or nuts. If any abnormality is foun d, repair or replace th If any va lve caps are missing, install n 8. Check fo r problems in handrails, steps If any pr oblem is found, repair it. Tight