Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION Clean off any dirt from the surface. WARNING the 3 - 84 9. Check for pro blem in the gauges and m onitor in the operat or's cab. If any p roblem is f ound, replace the parts. 10. Check for da maged mirror, reflector, loo se mounting bolts Check that th bolts. Clean all dirt f ere is no damage to the mi rror or reflectors, an d replace i f there is any pro blem. Tighten any loose rom the surface of the mirror and reflector. rom the surface of the mir 11. Check for da mage to the seat belt and Before fitting the seat belt, check that there is no problem in the belt mount bracket or mounting b elt. If it is worn or damaged, replace the seat belt.

no signs of damage, replace belts in accordance with the following schedule: date of seat belt manufacture, or every 3 years after the start of actual usage, whichever date comes first. seat belt during operations. o that it is not twisted. Even if there are no signs of damage, replace belts in accordance w ith the following s 5 years after the date of seat belt manufacture , or every 3 years afte r the start o f actua l usage, wh ichever date comes f irst Always wear the seat belt during operations. o that it is not twisted. Fit the seat belt s REMARK belt manufacture attached to the seat belt is t The date of seat to the seat belt is t start of the 5-year period.

It is not the start of the 3-year period actual usage. REMARK The date of manuf acture of the seat belt is m arked on the belt at t place indicated b y the arrow in the diagram on the right. Check that there a re no loose bolts on the eq uipment mounting t seat belt to the m achine, and tighten if nece Tightening torque : 27 to 34 Nm (2.8 to 3.5 k gm, 20 to 25 If t he belt is dam aged or fluff is starting to f orm, or if there is a damage or defor belt. mation of the seat belt holders, replace the se 12. Is door lock n ormal? Check that th ere is no damage to the c ab door lock. Repair or replac e if an y problem