Komatsu — WORK WHICH CAN BE CARRIED OUT USING A MOTOR GRADER

. OPERATION OPERATION 3 - 143 FLAT-BOTTOMED DITC I f there is no V-groove, make (A) the flat-bottomed ditch. The sl ope of t he roa d shoul der mus t be flatter than 1. Operate th e power tilt and angle the blade t o the front. 2. Operate th e drawbar s hift cylinder a nd set th e circle fully to the left of the machine. 3. Place the front right tir e in the botto m of the V-ditch . 4. Set the bla de so that t he right edge of the bl ade comes to the inside of t ditch. he front right tire at the width of the flat-bottomed 5. Operate th e right blade lift cylinder t o lower t he right end of the blade, and set it to the digging dept h. raise the right end of the 6.

Operate th e left blade lift cylinder to raise th end of the blade, and set it to the desire d angl e for the slope f ace of the road shou lder.