. OPERATION TROUBLESHOOTING PRECAUTIONS WHEN CONNECTING AND DISCONNECTING BOOSTER CABLE WARNING 3 - 182 STARTING ENGINE WITH BOOSTE When starting the engine with a booster Whe n connecting t he cables, never contact the positive (+) and nega (-) te rminals. Whe n starting the engine with a booster ca ble, wear safety glasses rubb er gloves. Be c areful not to l et the normal machine an d problem machine con each other. This pr events sparks from gener ating near the battery w could ignite the hy drogen gas given off by the battery.
Make sure that th ere is no mistake in the booster cable connecti The f inal connecti on is to the engine block of the problem machine, spar ks will be gen erated when this is done, so connect to a place a as po ssible from t he battery. Whe n disconnecti ng the booster cable, tak e care not to bring the c in co ntact with ea ch other or with the mach ine body. NOTICE ize of the booster cable and clip should be suitable for the battery size. battery of the normal machine must be the same capacity as that of the engine to be started. k the cables and clips for damage or corrosion. sure that the cables and clips are firmly connected.
The s ize of the bo oster cable and clip shou ld be suitable for the ba ttery size. The battery of the normal machine must be the same capacity as t hat of the engine to be starte Chec k the cables and clips for damage or c Make sure that the cables and clips are firm Chec k that the wo rk equipment lock levers and parking brake leve rs of both machines are in th e LOCK position Chec k that each le ver is in the NEUTRAL p osition. CONNECTING THE BOOSTER CABLES Keep t he starting s witch of the normal ma chine and failed mac in OFF position. Conne ct the boost er cable as follows, in t he order of the numb marked in the figur e. 1. Co of t 2. Co ter 3. Co of t 4. Co of t 1.
Co nnect 1 clip of booster cable (A) to the positive (+) term he problem machine. her clip of booster cab normal machine. le (A) to the positive 2. Co nnect the ot minal of the 3. Co nnect 1 clip of booster cable (B) to the negative (-) term he normal m achine. 4. Co nnect the ot her clip of booster cabl e (B) to the engine bl he problem machine.