Komatsu — HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC

. MAINTENANCE OUTLINES OF SERVICE 4 - 5 FUEL To prevent the mo isture in the air from condensing and formi ng water inside the fuel tank, always fill t he fuel tank after completing t he day's work. a precision instrument, and if fuel containing water or dirt is used, it cannot work properly. eful not to let impurities get in when storing or adding fuel. hat matches the temperatures given in the Operation and Maintenance Manual.

The fuel pump is a precision instrument, and if fuel containin g water or dirt is used, it cannot work pr Be extremely car eful not to let impurities get in when storing Always use fuel t hat matches the temperatures given in the If the fuel is us of lower than - If the fuel is use this may result If the fuel is us ed in temperatures lower than the specifie d temperature for use (particularly at te mperatures 15°C (5°F)), the properties of the fuel will m ake it congeal. If the fuel is use d in temperatures higher than the specified temperature for use, the viscosity will go down, and in a drop in output or other problems.

Before starting the engine, or when 10 minutes have passed after adding fuel, drain the sediment and water from the fuel tank. If the engine runs out of fuel, or if the filters have been repla ced, it is necessary to bleed the air from the circuit. If there is any fore ign material in the fuel tank, wash the tank and fuel system. NOTICE Use only diesel fuel. Use The engine mounted o n this machine employs electronic control and a high-pressure fuel injection device to obta in good fuel consumption and good exhaust gas characteristics. For this reason, it requires high precision for the parts and good lubrication.

If kerosene or other fu el with low lubricating ability is used, there will be a big drop in durability. COOLANT AND WATER FOR DILUTION Komatsu genuine SUPERCOOLANT (AF-NAC) has the important function of preventing corrosion as well as preventing freezing. Even in the areas where freezing is not an issue, the use of antifreeze coolant is essential. Komatsu machines are supplied with Komatsu SUPERCOOLANT (AF-NAC). SUPERCOOLANT (AF-NAC) has excellent anticorrosion, antifreeze and cooling propertiesand can be used continuously for 2 years or 4000 hours. As a basic rule, we do not recommend the use of any coolant other than SUPERCOOLANT (AF-NAC).

If you use another coolant, it may cause serious problems, such as corrosion of the engine and aluminum parts of the cooling system. When using antifreeze, always observe the precautions given in the Operation and Maintenance Manual. Coolant is already diluted with distilled water, so it is not flammable. The density used for the coolant differs according to the ambient temperature. For details of the density of the coolant, see "CLEAN INSIDE OF COOLING SYSTEM (PAGE 4-19)". Even in the areas where it is not considered necessary to prevent freezing, always use coolant with a density of over 30% in order to prevent corrosion of the cooling system.

Coolant is diluted with distilled water that does not contain any ions or water-hardening substances. Never dilute the coolant with ordinary water. If the engine overheats, wait for the engine to cool before adding coolant. Komatsu genuine preventing freezin Even in the areas where freezing is not an issue, the use of Komatsu machine s are supplied with Komatsu SUPERCOOL ANT (AF-NAC). SUPERCOOLANT (AF -NAC) has excellent anticorro sion, antifreeze and cooling propertiesand can be used continuously for 2 years or 4 000 hours. As a basic rule, w e do not recommend the use of any coolant other than SUPERCOOLANT (AF-NAC) . If you use another coolant, i cooling system.

t may cause serious problems, such as corrosion of the engine and aluminum parts of the eeze, always observe the precautions given in the Operation and Maintenance Manual. diluted with distilled water, so it is not flammable. for the coolant differs according to the ambient temperature. density of the coolant, see "CLEAN INSIDE OF COOLING SYSTEM (PAGE 4-19)".

When using antifr eeze, always observe the precautions give n in the Operation and Maintenance Ma Coolant is already diluted with distilled water, so it is not flam The density used for the coolant differs according to the am For details of the density of the coolant, see "CLEAN INSID E OF COOLING SYSTEM (PAGE 4-19) Even in the areas where it is not considered necessary to pr event freezing, always use coolant with a density of over 30% in order to prevent corrosion of the cooling system . Coolant is diluted with distilled water that does not contain an y ions or water-hardening substances. N ever dilute the coolant with o rdinary water.

heats, wait for the engine to cool before adding coolant. If the engine over heats, wait for the engine to cool before ad If the coolant level is low, it will cause overheating, and will als o cause problems with corrosion due to air entering the coolant.