. MAINTENANCE OUTLINES OF SERVICE Coupled Plasma) analyzer to copper, and other metal wear early detection of failures. 4 - 6 GREASE zure and noises at the joints. is used under heavy-duty conditions. Always use the recommended grease and Grease is used to prevent sei This construction equipment f ollow the change intervals an Manual. d recommended ambient temperatures given in this Operation and Main tenance Grease fittings not listed in th e inspection and maintenance se ction are grease fittin gs that are used at the time of overhaul, so there is no ne ed to grease these points.
When using the machine after it has been in storage for a long time, carry out greasi ng if there is any sti ffness or screeching. grease that is pushed out when greasing. Always wipe off all of the old grease that is pushed out when g Be particularly careful to wipe off the old grease in places wher e sand or dirt stickin g in the grease wou ld cause wear of the rotating parts. CARRYING OUT KOWA (Ko matsu Oil Wear Analysis) KOWA is a maintenance service that makes it possible to prevent machine failures and downtime. With KO WA, the oil i s periodically sampled and a nalyzed. This enables early detection of wear of the m achine drive parts a nd other problems.
We strongly recommend you to u se this service. The oil analysis i s carried out at actua l cost, so the cost is low, and the results of the analysis are re ported together with recommendations which will redu ce repair costs and machine downtime. KOWA ANALYSIS ITEMS Measurement of density of m This uses an ICP (Inductive measure the density of iron particles in the oil.
Measurement of quantity of p articles Quantifier Index) measurer to This uses a PQI (Particle measure the quantity of iron p articles of 5µm or more, enabling Others Measurements are made of it ems such as the ratio of water in the oil, density of th e coolant, ratio of fu el in the oil, and dynamic viscosity, en abling a highly precise diagnosis of the machine's he alth.