. MAINTENANCE SERVICE PROCEDURE SERVICE PROCEDURE INITIAL 250 HOURS SERVICE (ONLY AFTER THE FIRST 250 HOURS) INITIAL 1000 HOURS SERVICE (ONLY AFTER THE FIRST 1000 HOURS) 4 - 18 Carry out t he following maintenance o nly after the firs t 250 h ours of operation on new machines.
CHANGE OIL IN TRANSMISSION CASE, CLEAN CHANGE OIL IN FINAL DRIVE CASE CLEAN FINAL DRIVE BREATHER CHANGE OIL IN CIRCLE REVERSE GEA R CASE REPLACE HYDRAULIC TANK FILTER ELEMENT CHANGE OIL IN TANDE M DRIVE CAS For details of the method of r eplacing o r maintaining, see the section on EVERY 25 0 HOURS, EVERY 500 HOURS, 1000 HOURS AND 2000 HOURS Carry out t he following maintenance o nly after the firs t 1000 hours o f operation on new machines. CHECK ENGINE VALVE CLEARANCE, For details of the method of replacing or maintaining, see th e sectio n on EVERY 2000 HOURS SERVICE.