. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN HYDRAULIC TANK, CLEAN STRAINER WARNING stopped, and may cause burns. Wait for the and 4 - 71 EVERY 2000 HOURS SERVIC Maintenance for ev ery 50, 250, 500 and 1000 hours s ervice sh ould be ca rried out at the sa The parts and oil are at high temperature temperature to go down before startin g the work When removing th e oil filler cap, turn it slowly to release t he interna l pressure, Refill amount of oil: 45 liters (11.8 8 US gal) 1. Set the machin e in position as fo llow s to c heck the oil leve l. n and face the wheels straight to the front.
Return the le Set the front Return the b it lightly to th Return the le aning of the front tires to th e uprigh t positio n and face the wheels straigh Set the front frame and rear fr ame facin g straigh t (articulated angle = 0 deg.). Install t he articulate lock pin. Return the b lade sideshift to th e center of the ma chine, s et the blad e at right angles to the chassis and lower 2. Remove bolt (1 ), then remove co ver ( 3. Loosen oil fille inside the hydr 4. To return the o engine, then d epress the brake ipped with a b approximately 20 times. machines equ lade accumulator , turn accumulator "O N", then stop the engine, an d operat e the bla lift lever to rele ase the pressure 5.
Put an oil conta iner under drain plug (P) to catch t 6. To prevent get drain the oil. To prevent the oil from spurting o ut, gradua lly loose n drain p (P).