. MAINTENANCE SERVICE PROCEDURE EVERY 4000 HOURS SERVICE CHECK WATER PUMP CHECK FAN PULLEY CHECKING HIGH-PRESSURE PIPING CLAMP FOR LOOSENESS AND HARDENING OF RUBBER 4 - 77 Maintenance for every 50, 250, 500, 1000 and 2000 ho urs service should be carried out at the same Check tha t there is no play in the pulley or any grease l eakage, water leakage, or clogging of th e drain hole. I f any problem is found , contact your Komatsu distributor for d CHECK ACTUATION OF COMPRESSOR Check the following items.
If any problem is found, plea se ask your Komatsu distributor to carry out d isassembly, repair, or replacement Are the compressor and magnet clutch turned ON-O FF when the air conditioner switch is turned O N-OFF Is any a bnormal noise generated from the clutch or c Check tha t there is no play in the pulley or any grease l eakage, water leakage, or clogging of th e drain hole. I f any problem is found , contact your Komatsu distributor for d Check visually a nd touch by hand to check that there is no hardening of the rubber a n d no loose bolts o f the mounting clamps (2 places) for the high-pressurepiping between the supply pump and the common rail .
If ther e are any problems, he carry replacement.