Checking the Seat Belt Condition and Security ! WARNING When a seat belt is fitted to your machine replace it with a new one if it is damaged, if the fabric is worn, or if the machine has been in an accident. Fit a new seat belt every three years. 2-3-1-7/1 Inspect the seat belt for signs of fraying and stretching. Check that the stitching is not loose or damaged. Check that the buckle assembly is undamaged and works correctly. Check that the belt mounting bolts are undamaged, correctly fitted and tightened. Fire Extinguisher (when fitted) Checking the Fire Extinguisher Check the fire extinguisher for damage, security and signs of leaking.
Check that the gauge B indicates that the extinguisher is charged ie. the needle is in the GREEN segment. Note : If the needle is in or very near the RED segment at either end of the gauge, the extinguisher must be serviced or replaced. B Make sure the safety pin is fitted and secure. The extinguisher should be serviced every 12 months by a suitably qualified person. S170520 9803/3280 Issue 1 Section 3 Routine Maintenance Section 3 1 - 3 1 - 3 Seat Belt