Ditch Witch SK600 — Dust Ejector Valve

Service - 68 SK600 Operator’s Manual Procedures Coolant p NOTICE: See “Approved Coolant” on page 61. Check before startup and every 10 hours. Change every 1200 hours. Check 1. Check level at overflow bottle (1). 2. Add DEAC at fill (2) as needed to keep level at halfway point on overflow bottle. Change 1. Remove plug (3) to drain. 2. Install plug. 3. Add DEAC at fill to keep level at halfway point on overflow bottle. Dust Ejector Valve Check valve (shown) before startup and every 10 hours. Ensure valve is not inverted, damaged, plugged, or cracked. 1 t51om006w.eps 2 3 t51om028w.eps t51om026w.eps