Ditch Witch SK600 — Brake

SK600 Operator’s Manual Service - 67 Procedures p Belt, Fan Check every 100 hours. Change every 600 hours. Check Check for excessive slack, damage or wear. Belt is properly tensioned when it moves about 1/4-3/8” (7-9mm) when pushed at the long span (shown). Change 1. Loosen two alternator bolts (1,2). 2. Replace belt. 3. Adjust position as needed. 4. Tighten bolts. 5. Check tension. Brake Check at startup and every 10 hours. 1. Ensure parking brake pin (shown) moves freely allowing brake to be set and released. 2. Clean mud and debris from area around pin. t51om033w.eps t51om023w.eps