Ditch Witch SK600 — Radiator/Hydraulic Fluid Cooler

SK600 Operator’s Manual Service - 75 Procedures p Oil, Engine Check before startup and every 10 hours. Change at 50 hours and every 100 hours thereafter. Check 1. Check level at dipstick (2). 2. Add DEO at fill (2) as needed to keep level at highest line on dipstick. Change 1. While oil is warm, remove plug (3) to drain. 2. Install plug. 3. Remove filter (4) and replace with new filter. 4. Add DEO at fill to keep level at highest line on dipstick. Radiator/Hydraulic Fluid Cooler NOTICE: Radiator may need to be cleaned more frequently in dusty or grassy conditions. Check radiator every 50 hours. Clean as needed. Check Check radiator (shown) for dirt, grass, and other debris.

Check radiator hoses for wear. Check hose clamps for proper tightness. Clean 1. Clean fins with compressed air or spray wash. NOTICE: Do not damage fins with high pressure air or water. 2. Open rear hood and spray through radiator toward engine. 3. If grease and oil are present on radiator, spray with solvent and allow to soak overnight. 1 2 4 3 t51om007w.eps t51om040w.eps