Caterpillar — Maintenance Interval Schedule

84 Maintenance Section Cooling System Coolant Extender (ELC) - Add i00259474 Cooling System Coolant Extender (ELC) - Add SMCS Code: 1352-045; 1395-081 Caterpillar Extended Life Coolant (ELC) does not require the frequent Supplemental Coolant Additive (SCA) additions associated with the present conventional coolants. The Extender only needs to be added once. Check the cooling system only when the engine is stopped and cool. 1. Loosen the cooling system filler cap slowly in order to relieve pressure. Remove the cooling system filler cap. g00285520 Illustration 35 Cooling system filler cap 2. It may be necessary to drain enough coolant from the cooling system in order to add the Extender.

Pressurized System: Hot coolant can cause seri- ous burns. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pres- sure. 3. Add Extender according to the requirements for your engine’s cooling system capacity. Refer to the Operation and Maintenance Manual, “Refill Capacities” in the Maintenance Section for the capacity of the cooling system for your engine. Refer to the Operation and Maintenance Manual, “Cooling System Specifications” information for the Caterpillar ELC Extender additions. 1.

Remove the cooling system filler cap slowly in order to relieve pressure. 2. Maintain the coolant level within 13 mm (0.5 inch) of the bottom of the filler pipe. If the engine is equipped with a sight glass, maintain the coolant level to the proper level in the sight glass. 4. Clean the cooling system filler cap. Inspect the cooling system filler cap gaskets. Replace the cooling system filler cap if the cooling system filler cap gaskets are damaged. Install the cooling system filler cap. i01197583 Cooling System Coolant Level - Check SMCS Code: 1395-082 Check the coolant level when the engine is stopped and cool. g00103639 Illustration 36 Typical filler cap gaskets 3.

Clean the cooling system filler cap and check the condition of the filler cap gaskets. Replace the cooling system filler cap if the filler cap gaskets are damaged. Reinstall the cooling system filler cap. 4. Inspect the cooling system for leaks.