. OPERATION OPERATION WARNING POWER TILTDOZER Power tiltdozer with screw-adjustable tilt brace. Turn the brace with bar handle (1) and the distance ( l ) between the joints to change the cutting angle ( θ ) as follows. INCREASE distance ( l ) to INCREASE angle ( θ ) DECREASE distance ( l ) to DECREASE angle ( θ ). The standard for the cutting angle is 55 degrees. The standard for the distance between the joints is shown below. D65EX : 1150 mm (45.31 in) D65PX : 1146 mm (45.15 in) D65WX : 1150 mm (45.31 in) REMARK It is impossible to adjust blade angle of stable tilt brace. The standard for the cutting angle is 55 degrees.
3 - 107 ADJUST ANGLE OF BLADE EDGE (Powe r tiltdoze r onl It is dangerous i f the work equipment move s by mistake when a djusting angle of th e blade edge. Set the work equi pment in stable c ondition, then stop the en gine and lo ck the w ork equipment securely with the work equipm ent lock Adjust the angl e (θ) of t he bla de edge t o match the type o f soil. ANGLEDOZER The angle of th e blade edge o f the angledozer cannot be adjusted The standard f or the cutting a ngle is 55 degree s. The standard f or the distance between the joint s is shown below ( L ). Model Standard Use Range D65EX 1127mm (44.4in) 1117-1137mm (44.0-44.8in) D65PX 1096mm (43.2in) 1086-1106mm (42.8-43.6in)