. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE WHEN LOOSENING TENSION WARNING the procedure given below. If the track tension is not 4 - 27 4. Continu tension i s still loose, t he p in and b ushing a re excessively worn, so they must be eithe r turned or r eplaced. Please contact your Komats u distributor. I is extremel hod except relieved by th is procedure, pleas e contac t your Ko matsu dis tributor 1. Loosen plug (1) gradually to rele ase the grease. e turn. 2. When lo osening plug (1), turn it a maxim um of on 3. If t he gr ease does no t come out smoothly , move t he machine forward s and backwards a short distance 4. Tighten plug (1). 5.
To chec k tha t the correct t ension has been achieve d, mov e the machine backwards and forward s. 6. Check t he track tension a gain, a nd if the t ension is not correct, adjust it again.