Komatsu — CHECK ELECTRICAL INTAKE AIR HEATER

. MAINTENANCE SERVICE PROCEDURE loose, they will METHOD OF TIGHTENING (MASTER CONNECTING BOLT) 4 - 28 CHECK AND TIGHTEN TRACK SHOE BOLTS I f the ma chine is use d with trac k shoe b olts (1) break, so tighten any loose bolts immedia METHOD OF TIGHTENING (TRACK SHOE BOLTS) 1. Torq ue the track s hoe bolts to 539 ± 4 9 N·m ( 55 ± 5 kg ·m, 398 ± 36.2 lb ft). Then ensure th e nut and shoes are in clo se contact w ith the link contact s urface. 2. After checking, tig hten a further. 120° 1. First tighten to a ti ghtening to rque of 3 43 ± 39 N ·m (35 ± 4 kgf·m , 253 ± 29 lbft) then check that the link contact surfa ces are in cl ose contact 2.

After checking the link contac t surfac es, tighten th e bolt by 180 ORDER FOR TIGHTEN ING Tighten t he bolts in th e order shown in th e diagram on the righ CHECK ELECTRICAL INTAKE AIR HEATE Before th e start of the cold seaso n (once a year), contact your Komatsu distributor to have the electrical intake air heater re paired or ch ecked for di rt or disc