Komatsu — CHECK, ADJUST AIR CONDITIONER

. MAINTENANCE SERVICE PROCEDURE CHECK LEVEL OF REFRIGERANT WARNING receiver when the cooler is running at high speed. 4 - 33 CHECK, ADJUST AIR CONDITION (Machines equippe d with cab) CHECKING TENSION OF COMPRESSO R BELT If t he belt is loose, i t will slip and the co oling effect will be reduced. From time to time, press a point midwa y between the dri ve pulley and c ompressor pu lley with your finger (approx. 98 N (10 kgf)) and check that the tens ion is 15 to 18 mm ( 0.59 to 0.71 in). When the belt is n adjus t again after 2 If t he r efrigerant used in the air conditioner gets into your eyes or on your hands, it may cause loss of sight or frostbite. Do not touch the refrigerant.

Never loosen any par t of the refrigerant c Do no t bring any flam e close to any point w here the refrigerant gas is leaking. If the level of the re reduced. Run the e refrigerant in the re frigerant (gas) is lo ngine at high idling, frigerant circuit thro w, the cooling effe and check the fl ugh the sight gla ct will be ow of the ss of the No bubbles in re frigerant flow: Suita Some bubbles in (bubbles pass continuously): Lack o Colorless, transp arent: No refrigeran REMARK When there are bubbles, the refrigerant gas level is low, so contact your refr igerant dealer to ha ve refrigerant add ed. If the air conditioner i s run with the refrig erant gas level low, it will frigerant.

cause damage t o the compressor. New Freon R13 4a is used as the re OPERATING AIR CONDITIONER OFF-S EASON Even during the off- season, operate the air conditioner fo r 3 to 5 minutes once a month to maintain the oil film at al parts of the compre ssor.