Komatsu — REPLACE DOOR DAMPER

. MAINTENANCE SERVICE PROCEDURE may result in breakage of the hinge or door lock. 4 - 34 GREASE DOOR HING (Machines equip ped with cab) If the door make s a squeaking noise when i t is opened or closed, spray lubricant in through the split in the hinge bushing If the bushing is worn, replace the hin CHECK DOOR LOCK STRIKER (Machines equipped with cab) If the wear of the door lock striker exceeds 0.5 mm (0.02 in), (Machines equip ped with cab) If the wear of th e door l ock striker 0.5 mm replace the strike r.

If it is used at it is, t he play wil l increase and this REPLACE DOOR DAMPER r rubber groove is less than 2 mm (Machines equip ped with cab) If the depth of th e door dampe (0.08 in), replace the damper. There are four da mpers each a t the to p and bottom on t he left and right doors. 2 mm