Section 5B EFI Fuel System 5B.24 Pin # Function 1 17 2 18 3 19 4 20 5 21 6 22 7 23 8 24 9 25 10 26 11 27 12 28 13 29 14 30 15 31 16 32 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Permanent Battery Voltage Switched Battery Voltage TPS Set; “Auto-Learn” Initialization Terminal Throttle Position Sensor (TPS) and Temperature Sensor Ground Not Used Oil Temperature Sensor Input Not Used Throttle Position Sensor (TPS) Input Speed Sensor Input (+) Speed Sensor Ground (-) Not Used High Temperature Warning Output* Not Used Injector 1 Output Injector 2 Output Not Used Diagnostic Line Throttle Position/Temperature Sensor Supply Voltage Battery Ground Oxygen Sensor Input Battery Ground (Secondary) Not Used Not Used Not Used Safety Switch Input Not Used Not Used Main Relay Output Malfunction Indicator Light (MIL) Ignition Coil #1 Output Ignition Coil #2 Output Fan Control Output* *On LH775 Kohler liquid-cooled engines, the ECU and corresponding wiring harness provide two additional circuits.
Pin circuit 32 provides ability to control an optional OEM electric cooling fan, switching it on and off at the appropriate coolant temperatures using a relay. Pin circuit 12 switches on when the coolant temperature is too high to operate an optional engine temperature warning light.