Freightliner — FLA COE, FLB COE, FLC112 Conventional, FLD Conventional, FLL COE

Front Axle 33 6. Place a trammel bar at the rear of the front tires; locate the trammel pointers at spindle height, and adjust the pointers to line up with the scribe lines on the center ribs of the front tires. See Fig. 5 . Lock in place. Check that the scale is set on zero. 7. Move the trammel bar to the front of the tires (see Fig. 6 ), and adjust the scale end so that the pointers line up with the scribe lines. See Fig. 7 . 8. Read the toe-in from the scale, and compare it to the toe-in specification in Group 33 of the Heavy-Duty Trucks Service Manual. If corrections are needed, see Group 33 of the same manual for instructions on adjusting the toe-in. A f400100a 08/30/94 Fig.

7, Setting the Trammel Bar Pointers B f330082a 08/29/94 B minus A equals toe-in. Fig. 5, Wheel Toe-In (Overhead View) f330014a 08/30/94 Fig. 6, Trammel Bar Positioning Heavy-Duty Trucks Maintenance Manual, June 2001 33/3