Brakes 42 Brake Chamber Stroke Specifications Chamber Max Applied Stroke: inch (mm) Manufacturer Type * Size 9 1-3/8 (35) 12 16 Standard Stroke 1-3/4 (44) 20 24 30 2 (51) Gunite 36 2-1/4 (57) 2 (51) 20 16 24 (2-1/2 inch rated stroke) Long Stroke 24 (3 inch rated stroke) 2-1/2 (64) 30 12 1-3/8 (35) Standard Stroke 16 1-3/4 (44) 20 Haldex 2-1/2-Inch Extended Stroke 24 2 (51) 24 3-Inch Extended Stroke 24 2-1/2 (64) Standard Stroke 30 2 (51) Long Stroke 30 2-1/2 (64) 9 Less than 1-1/2 (38) 12 Standard Stroke 16 Less than 1-3/4 (44) 20 Meritor 24 Less than 1-7/8 (48) Long Stroke 24 Less than 2 (51) Standard Stroke 30 * Long stroke design is indicated by a tag, or embossing, on the brake chamber.
Specifications are relative to a brake application with 80 to 90 psi (550 to 620 kPa) air pressure in the brake chambers. If type 36 chamber is used, slack length should be less than 6 inches. Table 5, Brake Chamber Stroke Specifications Heavy-Duty Trucks Maintenance Manual, October 2009 42/15