Freightliner — FLA COE, FLB COE, FLC112 Conventional, FLD Conventional, FLL COE

Steering 46 46–01 Steering Driveline Lubricating Wipe the steering driveline grease fittings clean. See Fig. 1 , Fig. 2 , Fig. 3 , and Fig. 4 . Using a pressure gun, apply multipurpose chassis grease sparingly to the universal joints and slip-joint splines. For an FLA or an FLB, lubricate the slip-joint splines only when the cab is in the operating position. Turn the front wheels to the left for better access to the driveline. 2 46–02 TRW Manual Steering Gear Lubricant Checking, Model 503 1 1. Remove the fill plug from the top of the steering gear housing. See Fig. 4 . 05/28/93 f460005a WARNING 1. U-Joint Grease Fitting 2.

Steering Column End Yoke Pinch Bolt and Nut Use only an approved lubricant. Failure to add ap- proved lubricant could adversely affect steering ease under certain conditions and could hamper vehicle control. This could lead to an accident re- sulting in injury or property damage. Fig. 1, Steering Driveline Upper Universal Joint 2. Check the lubricant level. If low, add enough lu- bricant to bring the level to within 1/2 inch (13 mm) of the fill hole. Use hypoid gear oil API ser- vice classification GL–5 (with no zinc additive). At operating temperatures continuously above 30°F use viscosity grade SAE 90. At operating temperatures continuously below 30°F use viscosity grade SAE 75. 3.

Install and tighten the fill plug 14 lbf·ft (19 N·m). 46–03 TRW Manual Steering Gear Lubricant Changing, Model 503 1 NOTE: In climates with extreme temperature changes, lubricant should be changed every six months. 05/28/93 f460006a 1. Intermediate Shaft U-Joint Grease Fitting 1. While the steering gear lubricant is still warm, remove the steering gear drain plug and drain the old lubricant. Lubricant will drain faster if the fill plug is also removed. See Fig. 4 . After all lu- Fig. 2, Steering Driveline Intermediate Universal Joint bricant has drained, install and tighten the drain plug 14 lbf·ft (19 N·m). Heavy-Duty Trucks Maintenance Manual, November 2002 46/1