Freightliner — FLA COE, FLB COE, FLC112 Conventional, FLD Conventional, FLL COE

Engine 01 Spring-Tension Type On belts equipped with a spring tensioner, the belt tension is automatically adjusted. Check that the ten- sioner is holding tension on the belt by inserting the end of a breaker bar in the 1/2-inch square hole on the forward face of the tensioner, and rotating the tensioner down, away from the belt. When the breaker bar is slowly released, the tensioner should return to its original position. If not, see Group 01 of the Heavy-Duty Trucks Service Manual for replace- ment instructions. A D B E F 11/21/94 C A. Glazing B. Separating Layers C. Streaked Sidewalls D. Tensile Break E. Uneven Ribs F. Cracks f150010a Fig.

5, Drive Belt Replacement Conditions Drive Belt Tensions Engine Component Belt Tension: lbf (kg) Caterpillar C10 (3176) Refrigerant Compressor 80 to 100 (36 to 45) Caterpillar 3406E Alternator and Refrigerant Compressor 40 to 50 (18 to 23), per belt Fan 80 to 100 (36 to 45) Heavy-Duty Trucks Maintenance Manual, January 2007 01/4