Freightliner — FLA COE, FLB COE, FLC112 Conventional, FLD Conventional, FLL COE

Suspension 32 32–01 Suspension Inspecting Front Suspension Check WARNING Do not replace individual leaves of a damaged leaf spring assembly; replace the complete spring as- sembly. Visible damage (cracks or breaks) to one leaf causes hidden damage to other leaves. Re- placement of only the visibly damaged part(s) is no assurance that the spring is safe. On front spring assemblies, if cracks or breaks exist in the two top leaves, a loss of vehicle control could occur. Failure to replace a damaged spring assem- bly could cause an accident resulting in property damage, serious personal injury, or death. f320465 11/27/95 Fig.

1, Direct-Acting Shock Absorber (front suspension shown) Inspect the front spring assemblies for cracked, bro- ken, or abnormally bent leaves. If any of these condi- tions exist, replace the spring assembly. See Group 32 of the Heavy-Duty Trucks Service Manual for instructions. Front and Rear Suspension Shock Absorber Check placement of only visibly damaged parts is no as- surance that the spring is safe. Failure to replace a damaged spring assembly could cause an acci- dent, resulting in serious personal injury or prop- erty damage. Replace worn, cracked, or damaged spring brackets.

Failure to do so could result in bracket breakage, possibly leading to loss of vehicle con- trol and resulting in personal injury or property damage. Make sure the shock absorber brackets are tight, and the shock absorber is not striking or rubbing the frame or some other part of the chassis. Striking or rubbing the frame is characterized by chafe marks on the shock absorber body and the frame rail. See Fig. 1 . Check the rubber mounting bushings for cracks, cuts, swelling, and dry rot. Also, check the bushings for missing pieces. Replace the bushings as needed. 1. Inspect the forward and rear spring brackets and equalizer brackets for loose fasteners, wear, cracks, and other damage.

If any of these condi- tions exist, replace the damaged bracket(s). See Group 32 of the Heavy-Duty Trucks Service Manual for instructions. 2. Inspect the tandem-axle frame crossmember and gussets for loose fasteners, wear, cracks, and other damage. If any of these conditions exist, replace the damaged parts. See Group 32 of the Heavy-Duty Trucks Service Manual for instruc- tions. Inspect the shock absorber for oil leakage. If the shock absorber is damaged or leaking, replace it with a new one. See Group 32 of the Heavy-Duty Trucks Service Manual for replacement instructions.

Rear Suspension Check Freightliner Spring Suspension NOTICE Failure to replace the suspension crossmember or gussets if they are cracked, worn, or otherwise damaged could result in damage to the vehicle chassis. WARNING Do not replace individual leaves of a damaged leaf spring assembly; replace the complete spring as- sembly. Visible damage (cracks or breaks) to one leaf causes hidden damage to other leaves. Re- 3. Without detaching the torque arms, attempt to move (by hand) each radius-rod end up, down, in, and out. If there is any movement, replace the torque arm. If a torque arm needs to be re- Heavy-Duty Trucks Maintenance Manual, October 2009 32/1