Komatsu — AIR CONDITIONER CONTROLS

. OPERATION DETAILED CONTROLS AND GAUGES OPERATION DETAILED CONTROLS AND GAUGES window glass. (Vents (C) and (D) are fixed and cannot be adjusted.) turn air Ventilation Air Conditioner Maintenance 3 - 65 5. Adjust vents (A), (B1), and (B2) so that the air blows o When oper ating in the rainy season or when it is desired to the mist fr om the window glass or t switch (8) ON. conditioner Use Air Conditioner with Care NOTICE NOTICE When run ning the air conditioner, alw ays start with the engine running at low spe ed. Never start the air conditioner when the engine is running at high speed. It wil l cause failure of the air conditioner.

If water g ets into the control panel or s unlight sensor, it may lea d to unexpected fa ilure, be careful not to let water get on these parts. In addition, never bring any fla me near these parts. For the a uto function of the air conditi oner to work properly, alw ays keep the sunli ght sensor clean and do not leave anything around th e sunlight sensor that may i nterfere with its sensor f unction. When ru nning the air conditioner for a long time, turn th e lever to the FR ESH position once an hour to carry out on and cooling.

If you sm oke when the air conditio ner is on, the smoke m ay start to hurt y our eyes, so open t he window and turn r to FRESH for a while to remove the smoke wh ile continuing th Temperature Control When the cooler is on, set the temp erature so that it feels slightly cool whe n entering the cab ( 5 or 6 °C (9 or 10.8 ° F) lower t han the outside temperatu re). This temperature difference is con sidered to be the m ost suitable for your health, so always be careful to adju st the temperature pro perly.

When carry ing out inspection of a ma chine equipped with a n air conditioner, see the "CHECK AN D MAINTENANCE AIR CON DITIONER (PAGE 4-35) ,CHECK AIR CONDITIONER COMP RESSOR BELT T DITIONER (ONLY ENSION, ADJUST (PAGE 4- 49),CLEAN FRESH/RE CIRC AIR FILTERS OF AIR CON FOR MACHINES EQUIPPE d carry out inspe ction according to t