Komatsu — AIR CONDITIONER CONTROLS

. OPERATION DETAILED CONTROLS AND GAUGES Other Functions and air flow liquid go out and " portion of temperature setting switch (3) to display the failures in turn. After completing the troubleshooting, press OFF switch (1) again to return to the normal display. 3 - 66 Self-diagnostic Fun It is possible t o perf orm troubleshooting of various s ensors and equipment used on the a ir conditioner. 1. Turn t he s tartin g switch key t o the ON (B ) position. 2. Press displa y o operation stops . emperature crysta portion 3.

If the "∨" mperatur etting switch (3) are kept pressed a t the s ame ti me f or a east 3 seconds, the troubleshooting mode is displayed on t he liquid crystal display portio display an d failure mod Display Failure mode E-- No failure E11 Disconnection in RECIRC sensor E12 Short circuit in RECIRC sensor E15 Disconnection in water temperature sensor E16 Short circuit in water temperature sensor E18 Short circuit in sunlight sensor E43 Abnormality in vent damper E44 Abnormality in air mix damper E45 Abnormality in RECIRC/FRESH damper When more than one failure is detected, press the "∨" o