. OPERATION MACHINE OPERATIONS AND CONTROLS Ditching Work Ditching work can be performed efficiently by attaching a bucket which matches the digging operation and then setting the tracks parallel to the line of the ditch to be excavated. To excavate a wide ditch, first dig both sides and then finally remove the center portion. the dump truck body than if loading is done from the side. 3 - 131 RECOMMENDED AP In addition to the following , it is possible to further increas e the range of applications by usin g various attachments Backhoe Work A backhoe is suitable for e xcavating areas that are lowe r than the machine.
When the condition of the machine is as shown in the di agram on the right (angle between [bucket cylinder and link] °), the maximum excavation and [a rm cylinder and arm] is 90 obtained from the pushing When excavating, use t working efficiency. The range for excavating from the machine to a 30° angle towards the machine. There may be some diff erences depending on the e xcavation depth, but try to stay withi n the above range rather than operating the cylinder to the end of i ts stroke. Loading Work In places where the swing angle is narrow, work efficien cy can be enhanced by locating the d ump truck in a place easily visi ble to the operator.
Loading is easier and capa city greater if you begin from th e fron t of