Komatsu — BUCKET REPLACEMENT

. OPERATION MACHINE OPERATIONS AND CONTROLS BUCKET REPLACEMENT WARNING 3 - 132 Wh en pins are knocked in with a hammer, pieces of me tal may fly and cause serious injury en carrying out this ope ration, always wear goggles , hard hat, gloves, and other p rotective e quipment. Wh en the bucket is remov ed, place it in a stable condit If p ins are hit with a strong force, there is a hazard that th e pin may f ly ou t and i njure people i n the surrounding area. Ma ke sure t there is no one in the surrounding area before star ting the operation. Wh en removing the pins, d o not stand behind the bucke t.

In additio n, be extremely careful n ot to p ut your foot under the bucket le standing at the side f Wh en removing or insertin g pins, be extremely careful not to get y our f ingers caught Nev er insert your fingers i nto the pin holes when aligni ng the hole Stop the machine on a firm and flat surface and do t he work. W hen performing joint work , appoint a lead and follow that p erson's instructions Replacement 1. P lace the bucket in co NOTIC E removing the bucket, set the bucket cylinder (5) facing down as When shown in the diagram in the ri ght to prevent the front link ( 4) from jumping up un der the weight of the bu cket cylinder (5).

REMA RK removing the pins, place the bucket so that it is in light ct with the ground. bucket is lowered strongly to the ground, the resistance will When conta ct with the ground. If the bucket is lowered str resistance will be inc reased and it will be difficult to remove the pin s.