. OPERATION TROUBLES AND ACTIONS TOWING THE MACHINE WARNING 3 - 156 Serious injury or death cou ld result if a disabled machine i s towed incorrectly or if there is a mist ake in the selection or inspection of the wire rope. Always check that the wire rope used for towing has ample str ength for the weight of the machine being towed. Never use a wire rope whic h has cut strands (A), reduced diam eter (B), or kinks (C). There is dange r that the rope may break during th e towing operation. when handling wire rope. slope. Always wear leather gloves Never tow a machine on a During the towing operatio n, never stand between the towing machine and the machine being tow ed.
Operate the machine slowly and be careful not to apply any sud den load to the wire rope. NOTICE y for this machine is 585,000N(59,600kgf). The maximum towing capacit y for this machine is 585,000N(59,60 Always carry out towing opera tions within the maximum towing capacity. If the machine sinks in mud and cannot get out under its own power, or if the drawbar p ull of the excavator is being use d to tow a heavy object, use a wi re rope as shown in the diagram on the right. Place pieces of wood b etween wire ropes and body to prevent damage to ropes and bo dy. Hold the wire rope level and direct it straight to the track frame.
When towing a machine, travel at a speed of less than 1 km/h for a distance of only a few carrying out repairs. meters to a place that is suitable for mergencies. This is for use only in e SEVERE JOB CONDI TION When carrying out diggi ng operations in water, if the wo rk equipment m ounting pin goes into the water, carry ou greasing every time the operation is carried out. For heavy-duty operatio ns and deep digging, carry out g reasing o f the work equipment m ounting pins every time before operation. he boom, arm and bucket several times, then grease again. After greasing, operate t he boom, arm and bucket seve ral times, then