Komatsu — PHENOMENA THAT ARE NOT FAILURES

. OPERATION TROUBLES AND ACTIONS OPERATION TROUBLES AND ACTIONS or 3 - 155 6. Carr y out priming approx. 50 times with priming pump (5) at t side of the supply pump. 7. Turn the key in the startin g switch to the STAR T position an d start the engine. Whe n doing this, do not c rank the starting motor continuousl y for more than 20 sec onds. If the engine do es not start, wait for at least 2 m inutes, then try again. Perform thi s operation a maximu 8. If the engine does not sta rt, repeat the operatio n from Step PHENOMENA THAT ARE NOT FAILURES Note tha t the following pheno mena are not failures:

When the arm control lever is operated to the IN p osition and t work equipment is lowered under no load from a high positio the ar m speed will drop m omentarily when the arm is more . less a t the vertical position When the bucket control le ver is operated to the CURL positi and th e work equipment is n, the bucket spee lowered under no lo ad fro m a hi positio d will drop momenta rily w hen t . bucke t teeth are more or l ess at the horizontal p osition The b ucket or arm will fl g operations. uctuate by itself during heavy-du diggin When starting or stopping the swing, noise will b e emitted fro m the brake valve.

When going down a steep slope at low speed, a noise will be emitted from the trav el motor brake v