Komatsu — DISCHARGED BATTERY

. OPERATION TROUBLES AND ACTIONS Battery Charges 3 - 158 When charging the battery, if th e battery is not handled correctly, there is a hazard that the battery may explode. Always follow the instructions of "DISCHARGED B ATTERY (PAGE 3-157)" and the instruction manual accompanyin Set the voltage of the charger to match the voltage of the battery to be charged. If the correct v oltage is not selected, the charger may overheat and cause an e xplosion. arger clip of the charger to the Connect the positive (+) ch positive (+) terminal of the bat tery, then connect the negative (-) charger clip of the charger to battery.

Be sure to attach the Connect the positive (+) char ger clip of the charger to the positive (+ ry, then connec t the negative (-) charger clip of th securely. e charger to the negative (-) terminal of the battery. Be sure to attach the clips clips Set the charging current to 1/ 10 of the value of the rated battery capacity; when carrying o ut rapid charging , set it to less than the rated batter y capacity. If the charger current is too hig h, the electrolyte will leak or dry up , and t his may cause the ba ttery to catch fire and explode. If the battery electrolyte is fro zen, do not charge the battery or start the engine with a different power source.

l ignite the battery electrolyte and cause the battery to explode. engin There is a danger that this wil l ignite the battery electrolyte and cause the battery to explo Do not use or charge the batte ry if the battery electrolyte level is below the LOWER LEVEL line. This may cause an explosion. Check the batte ry electrolyte level periodically an d add distilled water to brin g the electrolyte l evel to the UPPER LEVEL line.