Komatsu — DISCHARGED BATTERY

. OPERATION TROUBLES AND ACTIONS Starting Engine with Booster Cables Connecting and Disconnecting Booster Cables WARNING When connecting the cables, never contact the positive (+) and negative (-) terminals. When starting the engine with a booster cable, always wear safety 3 - 159 When starting the e ngine with a booster cable, d glasses. Be careful not to le each other. This pre could ignite the hy t the normal machine and problem machine contact vents sparks from generating near the battery which drogen gas given off by the battery. If hydrogen gas explodes, it could cause serious injury. Be careful not to m ake a mistake when connecting a booster cable.

In the last connectio caused, connect t n (to the upper structure frame ), a spark will be he cable to a spot as far away f rom the battery as possible. (Avoid th e work equipment, however, beca use it is not a good conductor) When removing th e booster cable, exercise good care so that the s may not contact each other, or they contact the booster cable clip chassis. NOTICE The starting syste m on this machine is 24 V. Alway s use a 24 V machine for the normal machine Always use a boos ter cable or clip of a thickness th at is suitable for the size of the battery.

For the battery on t he normal machine, use a batter y with the same capacity as the problem mach Check that the cab le and clips are not damaged or c Connect the clips s Check that the lock levers of both machines are at t he LOCK position. Check that all lever s are at the neutral position.